The IP System is offered in both analog and digital clocks. It utilizes the Power over Ethernet infrastructure which provides power and data through the same CAT5 or CAT6 cable. Using this technology the need to connect other devices such as adapters, different cables and plugs is eliminated.
Lektra offers a wide range of styles Power over Ethernet clocks. Easy to install, our clocks use the same NTP time servers to display synchronized time across your facility.
The secondary clocks are synchronized over an Ethernet network using the Network Time Protocol (NTP) to provide a consistently accurate time display. The clocks can use time from the Internet-based or local NTP server. The NTP server receives the correct time from the satellite with the help of GPS and distributes this time information to all secondary clocks within a facility.
System operates with PoE / Power over Ethernet, which provides power and data via different ethernet cable at every hour. Using this technology the need to connect other devices such as adapters, different cables and plugs is eliminated.
Digital clocks in the synchronized clock system are designed to display hours, minutes and seconds. We also have a 6-digit, remote-controlled digital clock with stopwatch. It automatically receives time/date and other data from the master clock, and all clocks in the system work synchronously.
Digital clocks with PoE, wireless RF or RS485 communication options can be preferred as single-sided or double-sided.
Digital clocks are designed to display 7 segments, 4 digits, hours and minutes. We also have a 6-digit digital clock option with a stopwatch. It automatically receives time/date and other data from the main clock and all clocks in the system work synchronously.
Digital clocks with PoE, wireless RF or RS485 communication options can be preferred as single-sided or double-sided.
The flush mounted clocks are available with 57 mm high digits, 4-digit (HH:MM) and 6-digit (HH:MM:SS) versions. Designed to meet operating theatres standards - stainless steel casing and glass face. The clocks can be additionally equipped with a flush-mounted stainless steel remote control necessary to operate the stopwatch function. They also offer the option of an alternating time and date display. The clocks are managed via the web panel.
- Super bright wide-angle selected LEDs
- Automatic brightness control
- Module construction, easy installation and maintenance
- Additional functions: stopwatch,
- Clocks are operational via LAN interface, optionally with wired remote
- Possible synchronization with NTP server
- Optional accessories: GPS receiver, temperature probe,
- As standard clocks are wall flush mounted
- Stainless steel case with glass face (can be cleaned with industrial cleaning supplies)
Analog clocks can be selected as single-sided or double-sided, with a diameter of 30 cm or 40 cm, depending on the application area. These clocks can be preferred as network (TCP/IP), RF wireless and RS485 wired. The cases of the clocks are made of ABS plastic. Analog clocks included in a system can be operated together or separately with digital secondary clocks. Secondary clocks can be selected as single-sided or double-sided, depending on the purpose of use.
Analog clocks can be selected as single-sided or double-sided, with a diameter of 30 cm or 40 cm, depending on the application area. These clocks can be preferred as network (TCP/IP), RF wireless and RS485 wired. The cases of the clocks are made of ABS plastic. Analog clocks included in a system can be operated together or separately with digital secondary clocks. Secondary clocks can be selected as single-sided or double-sided, depending on the purpose of use.
